Dude, Where's My Board?
HomeShopsBrowse
Log inSign up
HomeShopsBrowseAccount
About UsContactPrivacy PolicyTerms of Service
Browse›7'0" Zeppelin
7'0" Zeppelin photo 1

Last checked Sep 16, 2026

7'0" Zeppelin

7'0" x 21.25" x 2.95" (48 L)

$400

Used SurfUsed
San Clemente

Board Details

Fin Setup
Thruster
Fin Type
Futures
Board Type
Step Up
Shaper
Rusty
Model
Zeppelin
View Original Listing →

Description

7'0" Rusty "Zeppelin" 48L Used Surfboard #48317 Vendor: Rusty Model Name: Zeppelin City: San Clemente Condition: Used Length: 7'0" Width: 21 1/4" Thickness: 2.95" Volume: 48L Fins: Futures - 3 Boxes (not included) Construction: Poly Description: See photos to view the pressure dent details on the deck & bottom. The bottom has a 5" x 3" pro-repair towards the left fin box that wraps to the rail and there's a small shatter on it that is not water tight. The nose has some small under glass shatters that are water tight, with one small shatter that is not water tight. The tail has a small under glass shatter that is water tight. The left rail has a small to medium size semi-pro repair towards the tail, with a small crack on it that is not water tight. The right rail has the same shatter stated in the bottom description that is not water tight. It also has a small semi-pro repair right above it that is water tight. Then towards the nose, there is a large shatter/open ding that is not water tight. Don't understand the surfboard description lingo? Go to our Glossary of Terms. More Information: (Below Information from Rusty Surfboards) Originally, the Zeppelin was designed as an all-around board for a larger surfer. The board features a round tail with a balanced, fuller, outline. The nose and tail are both app 15.0 wide. The wide point is 1 inch and change forward. Center width is quite wide. It helps add a bit of curve to the outline, especially with the wider nose and tail. I recently downsized the overall width and thickness on the stock boards. I felt it need to be trimmed down a little...If you don't see a size you like you can always order a custom. The rocker is slightly less than average on the front end. Semi aggressive on the exit. This helps with paddling and catching waves. Yet with the tail rocker being on the plus side it has a tighter turning radius than expected. The bottom starts out relatively flat and the entry area has a little break. It flattens out through the center then works its way through the zone with approximately .25 inches of slightly concave Vee. Deepest at approx. 2 feet up. This gradually flattens out through the fins into a slight vee. The overall volume is shifted slightly forward. The ride is very smooth, "clean", and has exceptional range. Price: $400.00

More from Used Surf

View all →
6'6" Rising Sun
Loading

6'6" Rising Sun

6'6" × 20.75" × 2.65"

$399USED SURF

Last checked Sep 12, 2026

5'4" Rocket Fish
Loading

5'4" Rocket Fish

5'4" × 19.75" × 2.31"

$450USED SURF

Last checked Sep 12, 2026

6'0" Holy Hypto
Loading

6'0" Holy Hypto

6'0" × 20.13" × 2.56"

$650USED SURF

Last checked Sep 12, 2026

6'0" Puddle Jumper Pro
Loading

6'0" Puddle Jumper Pro

6'0" × 20.5" × 2.6"

$399USED SURF

Last checked Sep 12, 2026

More in San Clemente

View all →
6'2" Hawaii Step Up
Loading

6'2" Hawaii Step Up

6'2" × 18.75" × 2.38"

$650USED SURF

Last checked Sep 17, 2026

5'9" Flat Earth
Loading

5'9" Flat Earth

5'9" × 19.75" × 2.69"

$375USED SURF

Last checked Sep 17, 2026

5'7" Alley Rat
Loading

5'7" Alley Rat

5'7" × 18.75" × 2.55"

$675USED SURF

Last checked Sep 17, 2026

5'10" SI Wide
Loading

5'10" SI Wide

5'10" × 19.25" × 2.44"

$400USED SURF

Last checked Sep 17, 2026

← Back to browse